Technical Specifi Cations - Arcam DV27 Handbook

Technical specifi cations
General
Power Requirements
Power consumption
Dimensions
Weight
Video outputs
Composite video
S-Video
Component video
SCART socket with RGB video
Progressive scan video
Audio outputs
Analogue audio outputs
Output level
Frequency response
THD+N
S/N
Digital audio output (IEC958)
Accessories supplied
E&OE
NOTE: All specification values are typical unless otherwise stated.
115V or 230V AC, set by voltage selector switch on rear panel
Y 1V pk-pk in 75 , C 0.3V pk-pk into 75
Y 1V pk-pk into 75 ; Pb 0.7V pk-pk into 75 ; Pr 0.7V pk-pk into 75 .
All 0.7V into 75 , composite video 1V into 75 , and stereo audio.
Auto switching of TV with aspect ratio control
Pure Progressive ™ motion adaptive 4-field processing by Silicon Image Corporation
525P component video. Y 1V pk-pk into 75 ; Pb 0.7V pk-pk into 75 ; Pr 0.7V pk-pk into 75
Two pairs of stereo outputs on gold plated phono sockets
<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
105dB, measured 20Hz–20kHz, unweighted
PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
<30W
430mm x 90mm x 280mm
net: 6.2kg
packed: 7.8kg
1 x gold plated phono:
1V pk-pk into 75
1 x 4-pin mini-DIN:
3 gold plated phono sockets:
3 gold plated phono sockets:
2.2V rms at 0dB signal
20Hz to 20kHz (+0.1db, –0.5dB)
CR-314 remote control
2 x AAA batteries
Mains lead
Continual improvement policy
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
18