Leica Zeno 5 User Manual page 57

Zeno 5, Operation
IF the is
green
flashing green
flashing yellow
red
The Zeno 5 is also equipped with a charge LED, the left most LED. This LED
monitors the charging process of the battery in the Zeno 5. The behaviour of
the charge LED on the Zeno 5 and on the docking station is identical.
THEN
Charging is completed.
Charging is in progress.
The battery is not charging. Temperature out off
range.
• the battery or docking station are not Leica
Geosystems approved products.
OR
• the safety mechanism is faulty.
Insert a battery that has been tested in
another charger and is known to work.
If the LED continues to flash red with the
known working battery, the docking station
is defective and requires service.
57