Leica Zeno 5 User Manual page 39

Zeno 5, Operation
Step Description
Assuming the default power-saving parameters and battery reserve level
have not been altered, battery swap time is approximately two minutes.
You will not lose data if the battery is replaced within this time frame. The
Zeno 5 has internal super-capacitors that save the current data for up to
5 min while the battery is swapped.
To protect data, the safest place to store data is on a microSD card or
externally to the device on a USB memory stick or on a computer.
2. Slide the battery release key located just above the battery to the right to
release.
3. Pull the battery from the Zeno 5.
4. Match the contacts at the bottom of the battery with those in the battery
well of the Zeno 5, and gently snap into place.
5. Close the battery compartment.
39