Leica Zeno 5 User Manual page 43

Zeno 5, Operation
Step Description
When ordering USB SnapOn module, you must also order the country-
specific cable to be plugged into the wall/mains.
Make sure that the adaptor connector and Zeno 5 docking connector are
free of dust or any other debris before connecting them.
A slot in the side rail on each side of the Zeno 5 accommodates the locking
clips of the USB SnapOn module.
1. To attach the USB SnapOn module:
Align the USB SnapOn module with the base of the Zeno 5 and gently slide
up until the locking clips snap into place.
2. Insert the USB plug from the power supply/vehicle power outlet adaptor
into the USB serial port of the Zeno 5.
3. Plug the power cord into an external power supply.
OR
Insert the vehicle power outlet adaptor plug into the power outlet in the
vehicle.
43