Leica Zeno 5 User Manual page 53

Zeno 5, Operation
Description of the LEDs
IF the is
Charge LED Reflects the battery charge status if the Zeno 5 is attached to an
external power supply.
off
green
flashing green
flashing yellow
THEN
No external power was detected.
When a Zeno 5 is docked into a powered
docking station and the charge LED on the
Zeno 5 stays off, there may be a problem
with the Zeno 5 or with the docking
station. Use a Zeno 5 with a properly func-
tioning charge LED to isolate the problem.
Battery charging is completed.
Battery is charging.
Battery is not charging because battery tempera-
ture is outside the allowable range of 0° C to 40° C
(32° F to 104° F).
Allow the battery to come to an accept-
able range before reinserting the Zeno 5 in
the docking station.
53