Zeno 5, Operation
3
3.1
Turning Zeno 5 on
Turning Zeno 5 off
Putting Zeno 5 into
suspend mode
Operation
Power Functions
Press and release Power key (
flashes.
Zeno 5 must have a power supply.
If the Zeno 5 does not to power up, consider:
•
The battery capacity may be lower than the suspend threshold.
•
It may be overheated (>60° C).
•
The battery may have fallen below the configured suspend threshold.
Press and release power key (
Press and hold power key (
). Release the power key when the application LED
).
) for 6 s. Select the required option.
34