Leica Zeno 5 User Manual page 46

Zeno 5, Operation
Step Description
4. Aligning the contacts on the battery with the contacts in the spare battery
charge well at the back of the docking station.
Slide the spare battery in the charge well.
Press down firmly. Make sure that the contacts on the spare battery and
hose in the charge well meet.
5. The charge LED on the docking station switches on.
When the battery capacity reaches 95%, the LED turns solid green and
remains in this state once the battery is completely charged.
Refer to "3.5 LED Indicators on Docking Station" for information
about the charge LED.
6. Charge the battery for at least four hours before use.
Do not leave a spare battery in a charger for more than 72 hours. Doing
so may damage the battery or reduce its charge capacity.
If the battery is overheated (> 60° C), if the battery capacity is lower than 100 mAh
or if the battery may have fallen below the configured suspend threshold then the
Zeno 5 will not switch on
• when the power key is pressed.
• when A/C power is applied.
46