Leica Zeno 5 User Manual page 149

Exposure to radio
frequency (RF)
signals
Zeno 5, Safety Directions
The wireless device is a radio transmitter and receiver. It is designed and manufac-
tured not to exceed the emission limit for exposure to radio frequency (RF) energy
set by the OET Bulletin 65 Supplement C / Ministry of Health (Canada), Safety Code
6. These limits are part of comprehensive guidelines and established permitted levels
of RF energy for the general population. These guidelines are based on the safety
standards previously set by international standard bodies. These standards include a
substantial safety margin designed to assure the safety of all persons, regardless of
age and health.
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
This device has been shown to be capable of compliance for localised specific absorp-
tion rate (SAR) for uncontrolled environment / general public exposure limits specific
in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement
procedures specified in IEEE Std. 1528-2003.
SAR compliance for body-worn operating configurations is limited to specific belt-
clips, holsters or similar accessory configurations that have no metallic component in
the assembly providing at least 1.0 cm separation distance between the device and
the body of the user.
149