6
Use [Left/Right], [Clear], and the numeric buttons to change the name for
the group name, then press [OK].
If no change is necessary, press [OK] without making any change.
7
Press [Clear] to remove the displayed recipient from the group.
If no deletion is necessary, press [OK] to proceed to the next recipient in the group.
8
Repeat the previous step as necessary to remove all required recipients
from the group.
9
Press [Start] to finish changing the group.
10
Repeat the procedure as necessary from step 4.
11
Press [Stop/Reset] to return to standby mode.
4-25
OK
1
2
3
4
5
6
7
8
9
0
#
[OK]