Incorrect Or Garbled Characters - Epson Stylus C41 Series User Manual

w
2. Remove the new ink cartridge from its protective bag. Next,
remove only the yellow tape seal from the cartridge.
3. Place the ink cartridge into the ink cartridge holder. Do not
apply excessive force to the cartridge.
4. Close the ink cartridge clamp until it locks into place. If you
are replacing both cartridges, press the
button to switch to the color ink cartridge replacement
position, and replace the cartridge as explained above.
5. When you are finished replacing cartridges, close the printer
cover.
6. Press the
head and begins charging the ink delivery system. This
process takes about thirty seconds to complete.
When the ink-charging process is finished, the printer returns
the print head to its home position, the P power light stops
flashing and remains on, and the

Incorrect or garbled characters

Try one or more of these solutions:
Make sure that you are using the appropriate printer driver
for your printer.
Select your printer as the default printer in Windows.
188
Troubleshooting
Warning:
If ink gets on your hands, wash them thoroughly with soap
and water. If ink gets into your eyes, flush them immediately
with water. If discomfort or vision problems remain after a
thorough flushing, see a doctor immediately. Do not take the
used cartridge apart or try to refill it.
b
maintenance button. The printer moves the print
b
maintenance
b
error light goes off.