Epson Stylus C41 Series User Manual page 166

Color ink jet printer
Hide thumbs Also See for Stylus C41 Series:
Table of Contents

Advertisement

c
Caution:
EPSON recommends the use of genuine EPSON ink
cartridges. Other products not manufactured by EPSON
may cause damage to your printer that is not covered by
EPSON's warranties.
Leave the old cartridge installed in the printer until you have
obtained a replacement; otherwise, ink remaining in the print
head nozzles may dry out.
Do not refill the ink cartridges. The printer calculates the
amount of ink remaining using an IC chip on the ink
cartridge. Even if the cartridge is refilled, the amount of ink
remaining will not be recalculated by the IC chip and the
amount of ink available for use will not change.
Note:
You cannot continue printing with one ink cartridge empty, even if
the other cartridge still contains ink. Before printing, replace the
empty cartridge.
To replace an ink cartridge before it is empty or low, press the b
maintenance button and the P power button at the same time.
In addition to the ink used during document printing, ink is
consumed during the print head cleaning operation, during the
self-cleaning cycle which is performed when the printer is turned
on, and during ink charging when the ink cartridge is installed in
the printer.
For more information about ink cartridges, see "When handling
the ink cartridges" on page 9.
To replace an ink cartridge using the
follow the steps below.
1. Make sure that the printer is on. The P power light should be
on, but not flashing.
2. Open the printer cover.
b
maintenance button,
Replacing Ink Cartridges
9
9
9
9
9
9
9
9
9
9
9
9
159

Advertisement

Table of Contents
loading

Table of Contents