Table of Contents
Advertisement
Installation
3.6. Connecting water
hose to the product
To connect the water hose to the product,
follow the instructions below.
1. Remove the connector on the hose nozzle
adaptor in the back of the product and run the
hose through the connector.
2. Push the water hose down tightly and connect
to the hose nozzle adaptor.
3. Tighten the connector manually to fix on the
hose nozzle adaptor. You may also tighten the
connector using a pipe wrench or pliers.
4. Connect the other end of the hose to the
water mains (See Section 3.7) or, to use
carboy, to the water pump (See Section 3.8).
3.7. Connecting to water mains
(Optional)
To use the product by connecting to the cold water
mains, a standard 1/2" valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.
1. Detach the connector (1) from the faucet
adaptor (2).
3
3
2. Connect the faucet adaptor to the water mains
valve.
3. Attach the connector around the water hose.
8 / 32 EN
1
2
2
1
Refrigerator / User Guide
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SBS63XED and is the answer not in the manual?
Questions and answers
Where to connect water/ fill water on a dispenser
To connect water to the Smeg SBS63XED dispenser:
1. Connect the faucet adaptor to the cold water mains valve.
2. Fix the external water filter on the wall using the filter connecting apparatus.
3. Attach the filter upright on the apparatus, as indicated on the label.
4. Connect the water hose from the top of the filter to the product’s water connection adaptor.
5. Use hose clips to secure the hose and prevent movement.
6. Ensure all connections are tight and check for leaks after turning on the water.
Note: The water filter is not needed if using a carboy connection.
This answer is automatically generated
Water inlet
The water inlet specification for the Smeg SBS63XED is compatible with 3/4" and 1/2" BSP connectors, suitable for use with all mains water connections.
This answer is automatically generated