Table of Contents
Advertisement
Using the product
11. Autoeco
Press the auto eco button (
for 3 seconds to activate this function. If the
door remains closed for a long time when this
function is activated, the cooler section will switch
to economic mode. Press the button again to
deactivate this function.
The indicator will light up after 6 hours when the
auto eco function is active. ( )
12. Rapid freezing
Press the button (
) number (12) for rapid
freezing. Press the button again to deactivate the
function.
Refrigerator / User Guide
), number (11),
21 / 32 EN
5.2. Activating the water
filter replacing alert
(For products connected to water mains and
comprising filter)
The water filter replacing alert is adjusted as
described below.
1. Press the A (Keypad lock) button while the
refrigerator is operational.
2. Then press the following buttons respectively
4
4
3
3
1. Vacation button
2. Cooler temperature adjustment button
3. Rapid cool adjustment button
4. Freezer temperature adjustment button
If the buttons are not pressed in the respective
order, the button I indicator will turn off, a
short audible alert will be heard and the Filter
Replacement Alert indicator will light up.
The filter service life automatic calculation
function is inactive by default. This function must
be activated for products comprising a filter. Your
refrigerator will automatically indicate the filter
replacement period after 6 months. Repeating
this process when the filter service life automatic
calculation is active will cancel this function.
A
A
2
2
1
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SBS63XED and is the answer not in the manual?
Questions and answers
Where to connect water/ fill water on a dispenser
To connect water to the Smeg SBS63XED dispenser:
1. Connect the faucet adaptor to the cold water mains valve.
2. Fix the external water filter on the wall using the filter connecting apparatus.
3. Attach the filter upright on the apparatus, as indicated on the label.
4. Connect the water hose from the top of the filter to the product’s water connection adaptor.
5. Use hose clips to secure the hose and prevent movement.
6. Ensure all connections are tight and check for leaks after turning on the water.
Note: The water filter is not needed if using a carboy connection.
This answer is automatically generated
Water inlet
The water inlet specification for the Smeg SBS63XED is compatible with 3/4" and 1/2" BSP connectors, suitable for use with all mains water connections.
This answer is automatically generated