Taking Ice / Water; Drip Tray - Smeg SBS63XED Instruction Manual

Hide thumbs Also See for SBS63XED:
Table of Contents

Advertisement

Using the product

5.6. Taking ice / water

(Optional)
To take water (
) / ice cube (
ice (
), use the display to select the respective
option. Take water/ice by pushing the trigger
on the water fountain forward. When switching
between ice cube ( ) / fragmented ice ( )
options, the previous ice type may be discharged a
few more times.
• You must wait approximately 12 hours before
taking ice from the ice / water fountain for the
first time. The fountain may not discharge ice if
there is insufficient ice in the ice box.
• The 30 pieces of ice cubes (3-4 Litres) taken
after first operating should not be used.
• In case of power blackout or temporary
malfunction, the ice may partly melt and re-
freeze. This will cause the ice pieces to merge
with each other. In case of extended power
blackouts or malfunction, the ice may melt
and leak out. If you experience this problem,
remove the ice in the ice box and clean the
box.
A
WARNING: The product's water system
should be connected to cold water line
only. Do not connect to hot water line.
• The product may not discharge water during
first operation. This is caused by the air in
the system. The air in the system must be
discharged. To do this, push the water fountain
trigger for 1-2 minutes until the fountain
discharges water. The initial water flow may be
irregular. The water will flow normally once the
air in the system is discharged.
• The water may be cloudy during first use of
) / fragmented
• You must wait approximately 12 hours to get
• The product's water system is designed
• It is recommended to disconnect the water
• If the water fountain is not used for a long

5.7. Drip tray

(optional)
The water dripping from the water fountain
accumulates on the drip tray; no water drainage is
available. Pull the drip tray out or push on the edges
to remove the tray. You may then discharge the water
inside the drip tray.
24 / 32 EN
the filter; do not consume the first 10 glasses
of water.
cold water after first installation.
for clean water only. Do not use any other
beverages.
supply if the product will not be used for long
periods during vacation etc.
time, the first 1-2 glasses of water received
may be warm.
Refrigerator / User Guide

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBS63XED and is the answer not in the manual?

Questions and answers

Tsakane
March 30, 2025

Where to connect water/ fill water on a dispenser

1 comments:
Mr. Anderson
March 31, 2025

To connect water to the Smeg SBS63XED dispenser:

1. Connect the faucet adaptor to the cold water mains valve.
2. Fix the external water filter on the wall using the filter connecting apparatus.
3. Attach the filter upright on the apparatus, as indicated on the label.
4. Connect the water hose from the top of the filter to the product’s water connection adaptor.
5. Use hose clips to secure the hose and prevent movement.
6. Ensure all connections are tight and check for leaks after turning on the water.

Note: The water filter is not needed if using a carboy connection.

This answer is automatically generated

Tsakane
March 30, 2025

Water inlet

1 comments:
Mr. Anderson
March 31, 2025

The water inlet specification for the Smeg SBS63XED is compatible with 3/4" and 1/2" BSP connectors, suitable for use with all mains water connections.

This answer is automatically generated

Table of Contents