Table of Contents
Advertisement
Using the product
5.5. Cleaning the water tank
Remove the water filling reservoir inside the door
shelf.
Detach by holding both sides of the door
shelf.
Hold both sides of the water tank and remove at
45° angle.
Remove and clean the water tank lid.
Do not fill the water tank with fruit juice,
fizzy beverages, alcoholic beverages or
any other liquids incompatible for use in
the water fountain. Using such liquids
A
will cause malfunction and irreparable
damage in the water fountain. Using
the fountain in this way is not within the
scope of warranty. Such certain chemicals
and additives in the beverages / liquids
may cause material damage to the water
tank.
A
The water tank and water fountain
components cannot be washed with
dishwashers.
Refrigerator / User Guide
23 / 32 EN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SBS63XED and is the answer not in the manual?
Questions and answers
Where to connect water/ fill water on a dispenser
To connect water to the Smeg SBS63XED dispenser:
1. Connect the faucet adaptor to the cold water mains valve.
2. Fix the external water filter on the wall using the filter connecting apparatus.
3. Attach the filter upright on the apparatus, as indicated on the label.
4. Connect the water hose from the top of the filter to the product’s water connection adaptor.
5. Use hose clips to secure the hose and prevent movement.
6. Ensure all connections are tight and check for leaks after turning on the water.
Note: The water filter is not needed if using a carboy connection.
This answer is automatically generated
Water inlet
The water inlet specification for the Smeg SBS63XED is compatible with 3/4" and 1/2" BSP connectors, suitable for use with all mains water connections.
This answer is automatically generated