Table of Contents
Advertisement
6
Maintenance and cleaning
Cleaning the product regularly will prolong its
service life.
B
WARNING:
cleaning the refrigerator.
• Do not use sharp and abrasive tools, soap,
house cleaning materials, detergents, gas,
gasoline, varnish and similar substances for
cleaning.
• Melt a teaspoonful of carbonate in the water.
Moisten a piece of cloth in the water and wring
out. Wipe the device with this cloth and dry off
thoroughly.
• Take care to keep water away from the lamp's
cover and other electrical parts.
• Clean the door using a wet cloth. Remove all
items inside to detach the door and chassis
shelves. Lift the door shelves up to detach.
Clean and dry the shelves, then attach back in
place by sliding from above.
• Do not use chloric water or cleaning products
on the exterior surface and chrome-coated
parts of the product. Chlorine will cause rust on
such metallic surfaces.
6.1. Preventing malodour
The product is manufactured free of any
odorous materials. However, keeping the food in
inappropriate sections and improper cleaning of
internal surfaces may lead to malodour.
To avoid this, clean the inside with carbonated
water every 15 days.
• Keep the foods in sealed holders.
Microorganisms may spread out of unsealed
food items and cause malodour.
• Do not keep expired and spoilt foods in the
refrigerator.
Refrigerator / User Guide
Disconnect the power before
6.2. Protecting plastic surfaces
Oil spilled on plastic surfaces may damage the
surface and must be cleaned immediately with
warm water.
29 / 32 EN
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SBS63XED and is the answer not in the manual?
Questions and answers
Where to connect water/ fill water on a dispenser
To connect water to the Smeg SBS63XED dispenser:
1. Connect the faucet adaptor to the cold water mains valve.
2. Fix the external water filter on the wall using the filter connecting apparatus.
3. Attach the filter upright on the apparatus, as indicated on the label.
4. Connect the water hose from the top of the filter to the product’s water connection adaptor.
5. Use hose clips to secure the hose and prevent movement.
6. Ensure all connections are tight and check for leaks after turning on the water.
Note: The water filter is not needed if using a carboy connection.
This answer is automatically generated
Water inlet
The water inlet specification for the Smeg SBS63XED is compatible with 3/4" and 1/2" BSP connectors, suitable for use with all mains water connections.
This answer is automatically generated