Canon CP-10 User Manual page 50

Problem with ink cassette.
Correct as follows, then try printing again.
1. Check the state of the ink cassette.
2. Remove the paper that caused the error.
3. Turn printer off and back on.
There is a problem with the ink cassette.
Take out the ink cassette from the printer. Remove any slack from the ink sheet and
then insert the ink cassette back into the printer. If the problem still continues,
replace the ink cassette with a new one.
Refer also to Loading the Ink Cassette in the CP-10 User Guide .
Error occurred during communication.
Check the printer power and printer connections.
Power to the printer goes off while printing is in progress.
Check to make sure power is supplied to the printer.
The cable came loose or was disconnected while printing was in progress.
Check to make sure the cable is connected correctly.
Refer also to Compornents Guide in the CP-10 User Guide .
Problem with the printer.
Turn printer off and back on.
The printer unit cannot be initialized successfully.
Remove the cable from the DC IN terminal of the printer or from the wall outlet, and
then reconnect and turn on the printer. Start the print job over again.
There is too much paper in the paper cassette.
Remove paper from the paper cassette, and then make sure to load the correct
amount of paper in the paper cassette.
50