Installing/Uninstalling The Printer Driver - Canon CP-10 User Manual

Card photo printer printer driver
Hide thumbs Also See for CP-10:
Table of Contents

Advertisement

Installing/Uninstalling the Printer
Driver
This section describes how to install the printer driver on your computer.
Installation starts automatically the first time you connect the CP-10 to your
computer's USB port.
Important
• Be sure to follow the procedures given in this section when installing the printer
driver. Do not attempt to install the printer driver by clicking the [Start] button and
selecting [Settings], [Printers],and [Add Printer].
• If the printer driver is not installed because you have canceled installation or
because you could not complete the procedure,
Installation
(
p.21).
• After completing CP-10 printer driver installation, do not change the USB port
without first turning off your computer. If you do so, a copy of the printer driver will
be created. However, if you accidentally do this, use the following procedure to
correct the problem.
1. Disconnect the USB cable from your computer.
2. Use the following procedure to delete the copy of the printer driver. (Do not use
the uninstaller.)
(1) Click the [Start] button and select [Settings], and [Printers].
(2) Right-click the [Canon CP-10] icon and then select [Delete].
3. Restart your computer and reconnect the CP-10. (You can connect it to any
USB port.)
• When you use the following procedure, the USB driver for the CP-10 is also
installed automatically.
• For details on how to uninstall the printer driver, see
Troubleshooting the Printer Driver
12
Uninstalling
(
p.28).

Advertisement

Table of Contents
loading

Table of Contents