Canon CP-10 User Manual page 11

1
Connect one end of the USB cable to the DIGITAL terminal on the
CP-10, and the other end to a USB port on your computer.
• There is no need to turn off the CP-10 when connecting it to your computer.
• When connecting the CP-10 to your computer, make sure the connectors on
the ends of the USB cable match the terminals on the CP-10 and your
computer.
• For the location of your computer's USB port, refer to the documentation
provided with your computer.
2
The first time the CP-10 is connected to your computer, the "Add
New Hardware Wizard" dialog appears and installation starts
( pp.13, 18, 25).
• If your computer has multiple USB ports, you can use any one of
them for connecting the CP-10.
• When disconnecting the USB cable, you do not need to turn off the
CP-10 or your computer.
USB port
on computer
USB cable
11
Insert cable, making sure the
mark on printer is correctly aligned
with the mark on the cable.
To disconnect, pull while
pressing both sides of the
connector