To Prepare The Module Holder In The Instrument Panel; For The Installation Of The On-Board Monito - BMW X5 (E53) LHD Installation Instructions Manual

6.

To prepare the module holder in the instrument panel

for the installation of the on-board monitor
4
11
40
Retrofit/Installation kit No. 65 90 0 025 169
Installation instructions No. 01 29 0 030 090
41
11
F 53 0724 B
Issue date: 10.2001
Carefully cut the cross strut (40) off the radio
module holder (41) along the top on-board
monitor holder (4) using an oscillating saw.
Ensure that you do not damage the top on-board
monitor holder (4) as you cut the strut. Deburr the
cross strut (40) using a file and place the two
speed nuts 4.2 mm (11) on the top on-board
monitor holder (4) from below.
EN/12