Table of Contents
Advertisement
9. To install the holder for the mobile phone
1a
DThe figure shows the telephone console (25) for the E36/2/3/4/C, proceed accordingly
on the E36/5.
When inserting the mounting plate (1e) ensure that the threaded insert (1f) is inserted.
Depending on the design of the mobile phone, the extension piece from the installation kit
may have to be inserted between the top (1b) and bottom (1a) parts of the holder (1).
Align the holder (1a – f) and mounting plate (1e) on the cover (26) of the telephone console
(25) and mark the positions of the holes.
Drill the marked holes with a 2 mm drill bit and secure the mounting plate (1e) with self-tap-
ping screws ST4.2x16Z2 (6).
Align the top part (1b) on the mounting plate (1e) and secure it with a screw (1c) and washer
(1d).
Insert the bottom part (1a) in the top part (1b) and press it in until it engages.
It may be necessary to cut the centre console slight to ensure that branches D1 and D2
are not jammed as they pass through.
Lay branch D1 to the installation location of the control module for the hands-free module in
the footwell on the left.
Lay branch D2 to the centre console near the gearshift or selector lever.
Retrofit / Installation kit No. 84 64 0 025 816, 84 64 0 026 649
Installation instructions No. 01 29 0 025 885
1b
1c
1d
Issue date: 07 .2000
6
1e
D1
26
1f
25
a
D2
F 36 0151 M
EN/33
Advertisement
Table of Contents
