1) To install the glass wind shield - slot it into the space between the burner tray cover and the bottom access panel - secure with one bracket and one
screw on each side.
Burner Tray Cover
Glass Wind Shield
Bracket for Glass
Bottom Access panel
WEAThER cOvER INSTALLATION / REMOvAL
1) The unit should be covered when not in use for extended periods of time. The soft fabric cover is made of weather resistant material - to protect the unit
from the elements. Starting from one corner - slide the cover over the corner, then stretch the cover until it is fitted over all four corners.
CAUTION:
Never start the unit with the cover on.
Let the unit cool before installing the cover.
Turn off gas supply to unit before installing cover.