Table of Contents
Advertisement
installatiOn
Remove the protective coating from the faceplate before installation - see
handling instructions in panel install section.
1)
To install the faceplate - line up the tabs on the faceplate with the 'C'
shaped openings on the left and right sides of the unit. There are 3
slots on each tab so the faceplate to accommodate different finishing
materials.
2)
Install logo onto faceplate.
24
FAcEPLATE INSTALLATION
2)
3)
3)
4)
For installations where thicker finishing material is used - the optional
trim piece may be installed to fill the gap.
Install the trim between the bottom access panel and the faceplate as
shown below.
To remove - reverse steps.
Final Install
Trim Piece
OD42 Outdoor Gas Fireplace
Advertisement
Table of Contents
