Table of Contents
Advertisement
WALL SWITch INSTALLATION
(INcLUDED WITh UNIT)
1)
The unit comes with 10' of wire located on the left side of the unit.
2)
Install supplied electrical box in desired location.
3)
Route low voltage wire through electrical box.
4)
Connect 2 wires to switch (use supplied dielectric grease on connec-
tions)
5)
Install weather resistance cover plate to switch using 2 inner holes with
screws provided.
(Ensure gasket and spacer are in place)
6)
Mount completed switch assembly with cover plate to the electrical box
using 2 outer holes on cover plate. (Shown without facing material)
Do not wire
wall switch wires
to 120v wire.
OD42 Outdoor Gas Fireplace
CautIoN
BATTERY INSTALLATION/
REPLAcEMENT
1) Remove the front access panel by lifting up and out.
2) Remove the 2 screws securing the battery compartment.
3) Lift the battery compartment upwards.
4) Install 4 - AA batteries and reverse steps.
installatiOn
17
Advertisement
Table of Contents
