Cleaning The Pre Motor Filters; Cleaning The Exhaust Filter - Hoover Vacuum Cleaner User Manual

CLEaninG THE PrE MOTOr FiLTErS

Lift the bin release latch and
1
remove the dust bin from the
cleaner.
Remove the turbo tool from the
top cover of the cleaner.
Separate the flexible HEPA
4
filter pad from the filter frame by
pulling the tab or pushing from
underneath.
Gently tap the flexible HEPA
filter pad against the side of a
bin to release excess dust.
!
!
iMPOrTanT! For optimum performance, shake off excess dust from the filters regularly.
We recommend that the flexible HEPA filter pad is washed every 3 MONTHS.
!
!
iMPOrTanT! For optimum performance,
always keep your filters clean.
Place the bin on a flat surface
2
and lift latch to access the filter.
Wash the flexible HEPA filter pad
5
thoroughly under hand warm
water, gently squeezing the pad
until the water runs clean.
Remove excess water by
squeezing and leave to dry for
24 hours.
DO NOT USE HOT WATER
OR DETERGENTS.
Remove the BLUE filter pack
3
(containing the flexible HEPA
filter pad).
When completely dry
6
reassemble and refit filters
to cleaner.
- 9 -

CLEaninG THE EXHaUST FiLTEr

Lift the tab on the exhaust filter cover grille and
1
remove from the cleaner.
2 Wash the exhaust filter under hand warm water
until the water runs clean. Remove excess water
by shaking and leave to dry for 24 hours.
Refit filter only when completely dry.
DO NOT USE HOT WATER OR
DETERGENTS.
!
!
iMPOrTanT! For optimum performance,
always keep your filters clean. We recommend
that the exhaust filter should be washed every
3 MONTHS.
GB