Emptying The Bin; Cleaning The Pre Motor Filters; Cleaning The Exhaust Filter - Hoover Velocity Evo User Manual

EMPTYING THE BIN

!
IMPORTANT: Before emptying the bin, make
sure vacuum cleaner has been switched off.
1 1 To remove the bin from the cleaner press the
bin release button.
Hold the container over the bin and press the
2 2
easy open button.
The container release flap will open and you
can empty the debris into the waste bin with
no dust contact.
Once emptied, gently tap or shake the container
4 4 3 3
to release any excess dust.
Do not overfill the bin above the max level line.

CLEANING THE PRE MOTOR FILTERS

1 1
Rotate the upper part of the dust bin to open.
Gently tap both filters to release
3 3
any excess dust.

CLEANING THE EXHAUST FILTER

<40
1 1
Remove the exhaust grille by pressing the button.
2 2 Remove the exhaust filter by pressing the latch on both
sides.
The exhaust filter should be washed every month.
3 3
Remove the exhaust filter from your cleaner and wash
with lukewarm water.
Remove excess water by shaking and leave to dry for
4 4
24 hours. Refit filters only when completely dry.
- 5 -
2 2 Take out the pre motor filter and the separation
unit from the dust bin. clean excess debris from the
separation unit and refit.
4 4 Wash both filter and sponge under warm water until
the water runs clean. Remove excess water by
shaking and leave to dry for 24 hours. Reassemble
and refit filters to cleaner, only when they are
completely dry.
<40
<40
GB
<40