Cleaning The Pre-Motor Filters; Cleaning The Exhaust Filter - Hoover EVO User Instructions

CLEANING THE PRE-MOTOR FILTERS

Press the bin release buttons
1
and remove the dust bin from
the cleaner.
Remove the pet hair remover
turbo brush from the top cover
of the cleaner.
Separate the flexible filter
4
pad from the filter frame by
pulling the tab or pushing from
underneath.
Gently tap the flexible filter
pad against the side of a bin to
release excess dust.
!
!
IMPORTANT! For optimum performance, shake off excess dust from the filters regularly.
We recommend that the flexible filter pad is washed every 3 MONTHS.
DM EVO IM 48002652.indd 9
!
!
IMPORTANT! For optimum performance,
always keep your filters clean.
Place the bin on a flat surface
2
and press the filter access
button to open the top cover of
the bin.
Wash the pad filter thoroughly
5
under hand warm water,
gently squeezing the pad until
the water runs clean.
Remove excess water by
squeezing and leave to dry for
24 hours.
DO NOT USE HOT WATER
OR DETERGENTS.
Remove the BLUE filter pack
3
(containing the pad filter).
When completely dry
6
reassemble and refit filter
pack to the cleaner.
9

CLEANING THE EXHAUST FILTER

Lift the tab on the exhaust filter cover grille and
1
remove from the cleaner.
Remove the exhaust filter.
2
Wash the exhaust filter under hand warm water
3
until the water runs clean. Remove excess water
by shaking and leave to dry for 24 hours.
Refit filter only when completely dry.
DO NOT USE HOT WATER OR
DETERGENTS.
!
IMPORTANT! For optimum performance,
!
always keep your filters clean. We recommend
that the exhaust filter should be washed every
3 MONTHS.
12/10/2010 09:33:35