Abbott FreeStyle Navigator User Manual page 129

Steps
4.
View a line graph of your
glucose level history.
Select Time Period 08:30A
2 Hour
4 Hour
6 Hour
12 Hour
24 Hour
back Select
Note: The line graph display
range is between 20 mg/dL
(1.1 mmol/L) and 350 mg/dL
(19.4 mmol/L).
Glucose values exceeding
350 mg/dL (19.4 mmol/L)
will be plotted as 350 mg/dL
(19.4 mmol/L).
Glucose values falling below
20 mg/dL (1.1 mmol/L) will
be plotted as 20 mg/dL
(1.1 mmol/L).
• View a line graph for another
time period.
• End viewing line graphs.
Do This
a. Select Line Graphs from the Select Report menu.
i) Use the UP Arrow button or DOWN Arrow
ii) Press the RIGHT Option button (Select) to go to
b. Select the time period (2, 4, 6, 12, or 24 hours) using
the UP Arrow button or the DOWN Arrow button.
c. Interpret the graph:
• Notice your glucose target range (the shaded
horizontal band).
• Notice your glucose level (in mg/dL along the left
hand side) at different times (bottom line).
• Notice the trends and the times that your glucose
level is outside of your target range.
• Notice how different events that you entered are
located in relation to your glucose profile. Events
entered will be shown on the line graph with letters
indicating the event - "I" for Insulin, "M" for meals,
"E" for exercise, "H" for state of health and the
number (1 thru 8) for a generic event.
Note: The line shows both your continuous readings
(plotted every 10 minutes) and your blood glucose
readings (the "+" symbols on the line graph).
When viewing the line graph, you can scroll forward
on the time axis by pressing the UP Arrow button and
you can scroll backward on the time axis by pressing
the DOWN Arrow button. You will not be able to see
the date on the time axis.
d. Decide what to do next.
If you want to
Review Reports and Edit Events
button to highlight Line Graph.
the Select Time Period screen.
Then
1. Press the RIGHT Option button to return
to the Select Time Period screen.
2. Go to Step 4b.
1. Press the RIGHT Option button to return
to the Select Time Period screen.
2. Press the LEFT Option button (Back) to
return to the Select Reports screen.
3. Go to Step 2 to decide what to do next.
Section 12 119
OVER