Table of Contents
Advertisement
CHAPTER 4 – ACCESSORIES
Labeling the Set
To label the buttons on the set, first remove the plastic cover over the front
panel. Insert a pointed object into the semi-circular notch at the bottom of
the plastic cover and lift the cover upward.
Templates are shipped with the telephones. Write the button labels on this
template to show the directory numbers or features assigned to each button.
Then lay the template back on the front panel. Reinsert the plastic cover.
Fujitsu has developed an application file using Microsoft Excel for Windows
and Macintosh to assist in printing the templates. These files are available for
no charge via our World Wide Web site at http://www.fnc.fujitsu.com.
For use with the printing application, Fujitsu has included extra laser printer
4
compatible paper templates in the box with the Fujitsu SRS 12i / 24i IP Centrex
Telephone. Do not separate the templates until printing is complete.
As an alternative to laser printing, print, type, or write in the needed
designation on the template. Additional templates may be purchased from
an authorized distributor.
Please read the printing instruction carefully. Any loose materials must
be removed before placing the template in the laser printer. Failure to
remove loose materials may result in a paper jam in the printer.
Templates may be fed via the automatic or manual feed trays.
Please address questions about the program to FNC TAC, at 1-800-228-4736.
SRS-12i and SRS-24i Cover Removal
4-1
Advertisement
Table of Contents
