Drop; Transfer - Fujitsu SRS-12i User Manual

Conference by using Address Book
1. In order to add the third party for conference call, press ADR BOOK while you
are on the active call.
2. Select the phone number to be called from Address Book display on top line.
3. Press CONF button. The initial call is placed on hold, and the next available Call
Appearance is selected. The number selected from the ADR BOOK will be dialed
automatically.
4. Press CONF again to complete the conference call.

Drop

This feature allows dropping the last party added to a conference.
Note:
DROP is a network-based feature that is provided by your telephone company. Some
installations leave the other conference participants connected if you disconnect. Ask
your System Administrator whether your conference feature works this way.
Press the DROP key to remove the last party added to a conference. Other participants
can drop out of the call simply by hanging up.

Transfer

Allows transferring an active call to another party.
Note:
TRANSFER is a network-based feature that is provided by your telephone company.
Transfer the call using the dial pad or Speed Dial Key
1. Press the TRAN key while in an active call.
2. Dial the desired phone number using the dial pad or a Speed Dial key.
3. Press the TRAN key again to transfer the call.
Transfer the call using the Address Book
1. Press ADR BOOK and select the party to transfer the call to while in an active
call.
2. Select the phone number to be called from Address Book display on top line.
3. Press TRAN key. The initial call is placed on hold, and the next available Call
Appearance is selected. The number selected from the ADR BOOK will be
dialed automatically.
4. Press TRAN again to complete the transfer call.
A "blind" transfer is where no conversation takes place with the transferee before the
transfer is completed. To perform a blind transfer, press TRAN and wait for the person' s
phone to ring and then press TRAN to transfer the call.
2
2-3