Changing Of The Enabled Energy Saving Mode - Toshiba e-studio 223 Operator's Manual For Copying Functions

4 SETTINGS AND MANAGEMENT OF EQUIPMENT

Changing of the Enabled Energy Saving Mode

The settings of the enabled energy saving mode and auto sleep time (time until entering the
mode) can be changed.
1
Press and hold the
The present mode name (Sleep mode: SLP or Super sleep mode: SPS) is displayed in
the LED display for approx. 2 seconds, and then the current auto sleep time is displayed.
e.g.) Auto sleep time: 15 minutes in the super sleep mode
2
Press the
The mode is switched each time you press the button, and the selected mode name is
displayed in the LED display for approx. 2 seconds.
3
Press the
the auto sleep time.
The auto sleep time (1 to 240 minutes / 24 steps) is switched each time you press the
button, and the specified time is displayed in the LED display.
4
Press the [START] button.
The LED display returns to the normal one.
74 Changing of the Enabled Energy Saving Mode
button for more than two seconds.
button to switch the enabled mode.
(zooming out) or (zooming in) button to change