Default Settings - Toshiba e-studio 223 Operator's Manual For Copying Functions

3 COPYING FUNCTIONS

Default Settings

Initial settings established when the equipment is powered on before any of the user functions
are changed are called default settings. Each setting returns to its default when the power is
turned ON, when the energy saving mode is canceled, and when the [FUNCTION CLEAR] but-
ton is pressed.
Each default setting of this equipment at the time of the installation is shown below.
Item
Reproduction ratio
Copy quantity
Paper selection
Density adjustment
Image mode
Sorting
*1 The automatic paper selection (APS) can be set only when the Automatic Document Feeder (optional) is
used.
If you need to change the default settings listed above, contact your service representative.
56

Default Settings

Contents
25 - 200%
1 - 999
Automatic paper selection (APS)
Manual paper selection
Automatic copy density mode, Manual
copy density mode
TEXT/PHOTO, PHOTO, TEXT
Non-sort copying, sort copying
Default setting at installation
100%
1
*1 Automatic paper selection (APS)
,
Automatic copy density mode
TEXT/PHOTO
Non-sort copying