Saving Energy When Not In Use - Energy Saving Mode - Toshiba e-STUDIO2303AM User Manual

1 PREPARATION
 Saving energy when not in use - Energy saving mode -
To reduce power consumption, the equipment automatically enters into the energy saving mode when a
specified period of time has passed since its last use.
 Types of energy saving mode
Low power mode:"SAVING ENERGY" appears on the LCD screen.
Sleep mode:
When "Status Monitor" is running, the equipment does not enter into the sleep mode. If you want to enable
the sleep mode, exit it out.
 P.80 "Status Monitor"
The timers for "AUTO POWER SAVE" and "SLEEP MODE" have been set respectively as the factory
default settings. You can change them in the "USER FUNCTIONS" menu.
 P.144 "User Functions Menu List"
 To turn the equipment into the energy saving mode (Sleep mode) manually
Press [ENERGY SAVER].
Canceling conditions for energy saving mode
The energy saving mode is canceled under the following conditions.
 When [ENERGY SAVER] or [START] on the control panel is pressed.
- For the low power mode: Press [ENERGY SAVER] or [START]
- For the sleep mode: Press [ENERGY SAVER]
Press [ENERGY SAVER] for at least 0.5 seconds.
 When printing or scanning is performed from a PC connected with this equipment.
18 Preparation 1 - Turning Power ON
The equipment automatically enters into low power mode when a specified period of time
elapses.
The LCD screen is turned off and only [ENERGY SAVER] is lit.
The equipment enters into sleep mode when a specified period of time elapses or the
[ENERGY SAVER] button is pressed.