Daily Inspection - Toshiba e-studio 223 Operator's Manual For Copying Functions

6 MAINTENANCE AND INSPECTION

Daily Inspection

We recommend a weekly cleaning of the following items to assure you the best scanning perfor-
mance:
Be sure not to scratch the parts to be cleaned.
Do not use solvent such as thinner or benzene to clean machinery. This could cause defor-
mation or tarnishing.
When using chemical cleaning pads, observe the precautions pertaining to the product.
1
1. Scanning area (surface of the long rectangular glass) / 2. Original glass
Wipe with a sheet of soft dry cloth or soft cloth dampened in water and squeezed tightly. Do
not use alcohol or solvent.
3. Guide / 4. Platen sheet
Clean the surface as follows depending on the staining.
Clean it with a soft cloth.
Clean it with a soft cloth lightly moistened with water.
Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then
wipe it with a dry cloth.
100 Daily Inspection
2
3
4