Table of Contents
Advertisement
Quick Links
IMPORTANT:
THESE INSTRUCTIONS ARE TO REMAIN
WITH THE HOMEOWNER
These instructions are supplementary to the Installation
and Operating Instructions supplied with the fi replace
and should be kept together. Refer to the Installation
and Operating Instructions for proper gas supply, safety
requirements and operating instructions.
230911-12
TCWS.54NG03C2
BLACK DIAMOND
BURNER KIT
INSTRUCTIONS
PART# TCWS.54NG03C2
For Model: TCWS54
Series: C2
5056.42521032
TCWS.54NG03C2
Advertisement
Table of Contents
Related Manuals for Town & Country Fireplaces TCWS.54NG03C2
Summary of Contents for Town & Country Fireplaces TCWS.54NG03C2
- Page 1 Operating Instructions supplied with the fi replace and should be kept together. Refer to the Installation and Operating Instructions for proper gas supply, safety requirements and operating instructions. TCWS.54NG03C2 BLACK DIAMOND BURNER KIT INSTRUCTIONS PART# TCWS.54NG03C2 For Model: TCWS54 Series: C2 230911-12 5056.42521032 TCWS.54NG03C2...
-
Page 2: Contents Of Package
Refer to the Installation and Operating Instructions for proper gas supply, safety requirements and operating instructions. TCWS.54NG03C2 BLACK DIAMOND BURNER KIT INSTRUCTIONS PART# TCWS.54NG03C2 For Model: TCWS54 Series: C2 020611-12 5056.42521032 TCWS.54NG03C2 5 LB GLASS MEDIA INSTRUCTION PACK TCWS.54NG03C2 230911-12... - Page 3 Attach pilot to burner tray. Be sure pilot is attached to burner support rail with screw in fi rst hole position. (Fig. #2a) FIRST HOLE POSITION Fig #2a Fig #3 Secure the burner tray to manifold brackets using eight screws(Fig. #3). TCWS.54NG03C2 230911-12...
- Page 4 Ensure that the wide edge of the trim is against the fi rebox frame. (Fig. #6 & 7) Fig #7 WIDE EDGE TO FRONT OF FIREPLACE WITH FRONT TRIM, TO THE REAR OF THE FIREBOX FOR REAR TRIM. TCWS.54NG03C2 230911-12...
-
Page 5: Propane Conversion Kit
Fig #11 until the operation of the converted appliance is With a 7/16” wrench loosen the pilot head on the pilot assembly. (Fig. #11) checked as specifi ed in the manufacturer's instructions supplied with the kit. TCWS.54NG03C2 230911-12... - Page 6 Fig #16 10. Replace the minimum rate screw with the one provided in the propane conversion kit supplied with this fi replace. Ensure that the screw is fully seated. (Fig. #16) TCWS.54NG03C2 230911-12...
- Page 7 15. If the burner was removed in previous conversion/ installation steps replace in reverse order or return or servicing has been to installation process on Pg. 3. completed. Failure to do so will cause overheat Fig #21 ing and premature failure of the control system. TCWS.54NG03C2 230911-12...
-
Page 8: Gas Pressure Check
Correct gas pressure requirement: Supply Pressure Natural Gas Propane Min. Pressure 5.0" WC 12.5" WC (For purpose of input adjustment) Max. Pressure 13.9" WC 13.9" WC Manifold Pressure Maximum 3.8" WC 11" WC Minimum 2.1" WC 5.5" WC TCWS.54NG03C2 230911-12... -
Page 9: Burner Flame Adjustment
The fl ame should be just orange and “lazy” . It should NEVER be set to create sooting on internal parts and window glass. Allow the fi replace to run for 30 minutes before evaluating fl ame appearance. Fig #25 TCWS.54NG03C2 230911-12... -
Page 10: Replacement Parts
Replacement Parts (WHEN ORDERING, INCLUDE PART NUMBER WITH DESCRIPTION) ITEM ..DESCRIPTION ............PART NO. #1..BLACK DIAMOND BURNER ..TCWS.54NG03C2 #2..GLASS MEDIA (2 required) ....TCRP.501201 NOT SHOWN KIT CONTENTS: TCWS.54NG03C2 230911-12... - Page 11 TCWS.54NG03C2 230911-12...
- Page 12 Technical support: 1-250-748-1184 Web site: www.townandcountryfi replaces.net 2975 Allenby Rd., Duncan, BC V9L 6V8 Printed in Canada...
Need help?
Do you have a question about the TCWS.54NG03C2 and is the answer not in the manual?
Questions and answers