Helmet Holder; Shock Absorber; Carrier - Yamaha TW200 Owner's Manual

1

1. Helmet holder

Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
INSTRUMENT AND CONTROL FUNCTIONS

Shock absorber

w
This shock absorber
highly pressurized nitrogen gas.
For proper handling, read and
understand the following informa-
tion before handling the shock
absorber. The manufacturer can-
not be held responsible for proper-
EAU00260
ty damage or personal injury that
may result from improper han-
dling.
8 Do not tamper with or attempt
to open the gas cylinder.
8 Do not subject the shock
absorber to an open flame or
other high heat sources, other-
EW000030
wise it may explode due to
excessive gas pressure.
8 Do not deform or damage the
gas cylinder in any way, as
this will result in poor damp-
ing performance.
8 Always have a Yamaha dealer
service the shock absorber.
EAU01343
EAU00315
contains

1. Carrier

Carrier
w
8 Do not exceed the load limit of
8 Do not exceed the maximum
3-9
1
3 kg (7 lb) for the carrier.
load of 157 kg (346lb)/156 kg
(344 lb) (TW200C) for the vehi-
cle.
1
2
3
4
EAU00320
5
EW000032
6
7
8
9