Checking And Lubricating The Throttle Grip And Cable; Checking And Lubricating The Brake And Shift Pedals - Yamaha TW200 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Checking and lubricating the
throttle grip and cable
1
The operation of the throttle grip and
the condition of the throttle cable
should be checked before each ride,
2
and the cable should be lubricated or
replaced if necessary.
3
NOTE:
4
Since the throttle grip must be
removed to access the throttle cable
5
end, the throttle grip and the cable
should always be lubricated at the
6
same time.
7
1. Remove the throttle grip by
removing the screws.
2. Hold up the throttle cable, and
8
then apply several drops of oil to
the cable, allowing it to trickle
9
into the sheaths.
3. Grease the inside of the throttle
grip housing.
EAU03764*
4. Grease the metal-to-metal con-
tact surface of the throttle grip,
and then install the grip by
installing the screws.
Recommended lubricant:
Throttle cable:
Yamaha Chan and Cable
Lube or engine oil
Throttle grip housing and grip:
Lithium-soap-based grease
(all-purpose grease)
Checking and lubricating the
brake and shift pedals
The operation of the brake and shift
pedals should be checked before
each ride, and the pedal pivots
should be lubricated if necessary.
6-31
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
EAU03370