1
1. Retainer
2. Speedometer cable
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the
projections mesh with the slots.
2. Lift the wheel up between the
fork legs.
NOTE:
Make sure that there is enough
space
between
the
brake
before inserting the brake disc and
that the slot in the speedometer gear
unit fits over the retainer on the fork
leg.
PERIODIC MAINTENANCE AND MINOR REPAIR
3. Insert the wheel axle, and then
install the axle nut.
2
4. Lower the front wheel so that it is
on the ground.
5. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
90 Nm (9.0 m·kg, 65 ft·lb)
EAU03518
6. Connect the speedometer cable.
pads
1. Axle nut
2. Brake pedal free play adjusting nut
3. Brake rod
4. Brake camshaft lever
5. Drive chain adjusting plate
Rear wheel
To remove the rear wheel
w
6-42
2
3
5
a
1
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Loosen the axle nut.
4
1
2
3
4
5
EAU03519
6
7
EW000122
8
9