INSTRUMENT AND CONTROL FUNCTIONS
1
b
2
3
1. Starter (choke) knob "1"
4
Starter (choke) knob
5
Starting a cold engine requires a rich-
er air-fuel mixture, which is supplied
6
by the starter (choke).
Move the knob in direction a to turn
on the starter (choke).
7
Move the knob in direction b to turn
off the starter (choke).
8
9
1
a
1. Bolt (×2)
EAU03032
"1"
Seat
To remove the seat
Remove the bolts, and then pull the
seat off.
1
EAU01092
3-8
2
1. Projection
2. Seat holder
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
NOTE:
Make sure that the seat is properly
secured before riding.
1