Appendix E Installing Optional Memory; Installing Memory In The Scanner - Kodak I200 User Manual

Appendix E Installing Optional Memory

Scanner Model
i250 Scanner
i260 Scanner
i280 Scanner
Installing memory in
the scanner
A-61167 April 2005
The i200 Series Scanners come installed with the basic amount of memory
required for scanning. This may be sufficient for your scanning needs.
However, you may install additional memory (SODIMM) in the scanner to
accommodate long document scanning or scanning with certain scanner
features (e.g., auto-crop at 300 dpi or higher) or to improve scanning
performance. Refer to the following chart for scanner memory specifications.
Document Size
With standard memory (64 MB):
29.7 x 43.2 cm (11.7 x 17 in.)
With extended memory (256 MB):
29.7 x 66.0 cm (11.7 x 26.0 in.)
With standard memory (64 MB):
29.7 x 43.2 cm (11.7 x 17 in.)
With extended memory (256 MB):
29.7 x 66.0 cm (11.7 x 26.0 in.)
With standard memory (256 MB):
29.7 x 81.3 cm (11.7 x 34 in.)
IMPORTANT: DDR "Double Data RAM" style modules do not fit in the
i200 Series Scanners' CPU board socket. Use only PC-100
and PC-133 style modules.
Use proper precautions to avoid static when you install memory.
1. Power down the scanner.
2. Remove any documents from the feeder area.
3. Disconnect the power cord from the back of the scanner.
4. Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on
the back of the scanner.
Basic Memory
Installed in Scanner
64 MB
64 MB
256 MB
Total Memory
Allowed in Scanner
256 MB
256 MB
512 MB
E-1