Using The Scanner; Starting And Stopping Scanning; Automatic Feeding; Continuous Feeding - Kodak I200 User Manual

Using the Scanner

Starting and stopping
scanning

Automatic feeding

Continuous feeding

A-61167 April 2005
Scanning is controlled by software developed for your application. To start and
stop scanning, refer to the documentation provided with your software.
To scan a batch of documents, follow the guidelines for size, type, quantity,
etc., in the Introduction section. For faster throughput, feed documents into the
automatic document feeder (ADF) in landscape orientation (longer side as the
leading edge).
IMPORTANT: Staples and paper clips in documents may damage the scanner.
Remove all staples and paper clips before scanning.
1. Align the leading edges of the stacked documents.
2. Position the leading edge of the documents face down and centered
in the ADF.
3. Adjust the document feeder guides.
4. Adjust the output tray position, if necessary.
5. Pull out the output tray extender, if necessary.
6. Start scanning.
Continuous feeding allows you to place additional batches of documents in the
feeder for "infinite" feeding (with operator assistance).
• When only a few documents from one batch remain in the feeder, place the
next batch face down on top of those documents.
19