Point Grey Flea3 FL3-U3 Technical Reference Manual page 32

Point Grey Flea3 USB 3.0 Technical Reference
To reduce heat, use a cooling fan to set up a positive air flow around the camera, taking into consideration the
following precautions:
Mount the camera on a heat sink, such as a camera mounting bracket, made out of a heat-conductive material
n
like aluminum.
Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive material
n
like plastic.
Make sure the camera has enough open space around it to facilitate the free flow of air.
n
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
1 Welcome to Flea3 USB 3.0
19