Point Grey Flea3 FL3-U3 Technical Reference Manual page 15

Point Grey Flea3 USB 3.0 Technical Reference
White Balance
Color Processing
Digital Interface
Transfer Rates
GPIO
External Trigger Modes
Synchronization
Shutter
Image Buffer
Memory Channels
Flash Memory
Dimensions
Mass
Power Consumption
Camera Specification
Camera Control
Camera Updates
Lens Mount
Operating Temperature 0° to 45°C
Storage Temperature
Emissions Compliance
Operating System
Warranty
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
Automatic/Manual modes, programmable via software
On-camera in YUV or RGB format, or on-PC in Raw format
USB 3.0 interface with screw locks for camera control, data, and power
5 Gbit/s
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial
I/O: 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins
IIDC Trigger Modes 0, 1 (excluding FL3-U3-13E4), and 15
via external trigger or software trigger
Rolling Shutter (FL3-U3-13S2) / Global Reset (FL3-U3-32S2, FL3-U3-88S2) / Global
Shutter (FL3-U3-13Y3, FL3-U3-13E4)
Automatic*/Manual/One-Push*/Extended Shutter** modes (*Free running
only) (**except FL3-U3-13Y3)
0.008 ms to 1 second (FL3-U3-13S2) / 0.006 ms to 1 second (FL3-U3-13Y3) /
0.016 ms to 1 second (FL3-U3-13E4) / 0.01 ms to 32 seconds (FL3-U3-32S2) /
0.021 ms to 1 second (FL3-U3-88S2)
32 MB frame buffer
2 memory channels for custom camera settings
1 MB
29 x 29 x 30 mm excluding lens holder (metal case)
Without optics: 35 g (FL3-U3-13S2, FL3-U3-32S2) / 41 g (FL3-U3-13Y3,
FL3-U3-13E4, FL3-U3-88S2)
5 V, <3 W, via GPIO or USB 3.0 interface
IIDC v1.32
via FlyCapture SDK, CSRs, or third party software
In-field firmware updates
CS-mount (FL3-U3-13S2, FL3-U3-32S2) / C-mount (FL3-U3-13Y3, FL3-U3-13E4,
FL3-U3-88S2)
-30° to 60°C
CE, FCC, RoHS
Windows 7 32- or 64-bit
Two years
All Flea3 USB 3.0 Models
1 Welcome to Flea3 USB 3.0
2