Rear Panel - Sony BKM-16R Operation Manual

Rear Panel

a LAN (10/100) connector (10BASE-T/100BASE-TX)
Connect to the LAN (10/100) connector of the monitor by
using the SMF-700 or the cable supplied with the controller
attachment stand such as BKM-37H. Or connect to the
network or the LAN (10/100) connector of the monitor by
using a 10BASE-T/100BASE-TX LAN cable (shielded-
type, optional).
CAUTION
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• When you connect the LAN cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
• To connect the unit to the LAN (10/100) connector of the
monitor in 1 to 1 connection (NETWORK switch is set
to PEER TO PEER), use a straight (shielded-type) cable.
• The connection speed may be affected by the network
system.
b DC 5V/12V IN connector (male)
Connect to the DC 5V OUT connector of the monitor by
using the SMF-700 or the cable supplied with the
controller attachment stand such as BKM-37H. Or connect
the output cable of the supplied AC adaptor.
c NETWORK switch
LAN: To connect to the network.
PEER TO PEER: To connect to the LAN (10/100)
connector of the monitor in 1 to 1 connection.
1 LAN (10/100) connector
2 DC 5V/12V IN connector
3 NETWORK switch
Location and Function of Parts
9