Specifications - Sony BKM-16R Operation Manual

3
Connect the output cable on the AC adaptor supplied
with the unit to the DC 5V/12V IN connector of the
unit.
Note
When the multiple units are connected, set for the LAN
in the menu of the monitor before setting the
NETWORK switch to LAN.
4
Set the NETWORK switches of each monitor and the
unit to LAN.
Note
For connection, also refer to the manual of the connected
monitor.
14

Specifications

Specifications
Input/Output
LAN (10BASE-T/100BASE-TX) connector
RJ-45 × 1
DC 5V/12V IN Circle 4-pin (male) × 1
General
Power requirements
BKM-16R
DC IN: 5 V, 1.1 A (supplied by the
connected monitor)
DC IN: 12 V, 0.5 A (supplied by the
connected AC adaptor)
AC adaptor (MPA-AC2)
AC IN: 100 - 240 V, 50 - 60 Hz
DC OUT: 12 V, 3 A
Current consumption
5 V DC, 1.1 A/12 V DC, 0.5 A
Power consumption
Approx. 6 W
Peak inrush current
(1) Power ON, current probe method:
20 A (100 V), 60 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
10 A (230 V)
Operating temperature
0 °C to 35 °C (32 °F to 95 °F)
Recommended: 20 °C to 30 °C (68 °F to
86 °F)
Operating humidity
0% to 90% (no condensation)
Storage/transport temperature
– 10°C to + 40°C (14°F to 104°F)
Storage/transport humidity
0% to 90%
Operating/storage/transport pressure
700 hPa to 1060 hPa
Mass Approx. 2.1 kg (4 lb 10 oz)
Supplied accessories
AC adaptor (MPA-AC2) (1)
AC power cord (1)
Rack mount brackets (2)
Rack mount attachment screws (4)
Function labels (2)
Operation Manual (1)
CD-ROM (1)
Using the CD-ROM Manual (1)
Design and specifications are subject to change without
notice.