Ir Receiver - HDL BusPro SB-CMS-12in1 User Manual

User Manual
SB-CMS-12in1
Tips: when use buttons to control 12in1 to send out codes,set „key type‟ as universal
switch and set the parameter1(Switch no.) correspond to the UV switch number in 12in1,
and the parameter2(Switch Status) is ON.
Format IR Codes:All the IR codes in the 12in1 will be deleted.
Delete：Delete the IR code that is selected.

5.3 IR Receiver

Can send UV switch 249 „ON‟ command to enable the IR Receiver, or „OFF‟ to disable
from panel or other devices. Generally it works with HDL‟s IR/RFRemote Controller
(HDL-MTIRW), which has built-in HDL self-defined IR codes, can control HDL
panels/sensors directly, no need to learn IR codes.12in1 can support up to 5 pages, 40
keys in total.
For below setting, when press the first button in page 1, it will trigger the dimmer/relay(1-6)
to turn on/off channel1.
Multi function Sensor–User Manual 7