Further Settings Of Current Logic - HDL BusPro SB-CMS-12in1 User Manual

User Manual
SB-CMS-12in1
- On-Site Status
Show the value detected by sensors

5.5.2 Further Settings of Current Logic

There are 9 conditions, select the conditions you need. The details are as follows.
-Temperature（° C）
Condition is satisfied when the temperature is in the range you set.
Setting Range：－20° C~60° C
- Brightness(Lux)
Condition is satisfied when the brightness is in the range you set.
Setting Range：0~5000
-IR sensor
can set „movement‟ or „no movement‟ as a condition.
-Ultrasonic sensor
can set „present‟ or „absence‟ as a condition.
- Dry Contact 1
Use the dry contact 1 as a condition.
Disconnect：Take open circuit as a satisfied condition.
Connect：Take short circuit as a satisfied condition.
-Dry Contact 2
Use the dry contact 2 as a condition.
-UV switch（201－248）
Use UV switch as a condition. The range of the UV switch no. is 201-248, and the status
can be on or off.
Auto OFF（0~3600S） ：If this option is selected, the status of the UV switch will go off
automatically every time it is satisfied after the time you set. The range of the time that can
be set is 0~3600S.
Multi function Sensor–User Manual 11