Table of Contents
Advertisement
User Manual
SB-CMS-12in1
5.7.1 Normal Mode
- Open Delay
ON delay, setting range: 0-25.0s.
- Protection Delay
e.g. Set protection delay as 1 min(open delay as 0), now turn off relay, after 25s, you want
to turn on it, it will not turn on until 35s later; setting range: 0-60min.
5.7.2 Cycle Mode
If you enable the cycle mode and set it on, it will automatically produce an "on-off-on-off"
operation; setting range: 1-3600s.
5.7.3 Change Modes
Channel 3 and channel 4 are virtual channels, they are used to change the normal mode
and cycle mode for channel 1 and channel 2:
Multi function Sensor–User Manual
17
Advertisement
Table of Contents
