Table of Contents
Advertisement
User Manual
SB-CMS-12in1
5.4 Sensors setting
5.4.1 Basic Info
- Remarks of dry contacts
Remarks are recommended, you may make remarks according to the installation places
- On-Site Status
You can check the real-time values of sensors by refreshing or enable „Update status
automatic‟
- Compensation
You can adjust the temp/lux sensors by giving them compensation values, according to
the environment of your installation place.
- Sensitivity
Give the PIR/Ultrasonic sensors proper sensitivity to avoid the wrong trigger
- Other Functions
Enable the conditions you need here, they are: dry contact1/2, UV switch 1/2 and logic
status as a condition
- UV Switch ID
The sensors and dry contacts have different UV switch ID, send the corresponding UV
Switch ID „ON‟ to enable it, and „OFF‟ to disable it from panel or other devices.
Multi function Sensor–User Manual
8
Advertisement
Table of Contents
