Table of Contents
Advertisement
User Manual
SB-CMS-12in1
b) After 1 minute turn on the AC and set the temperature as 25℃:
Set IR Sensor - „Movement‟ and dry contact1 - „Connect‟ as input conditions, and the
relation for the logic is „AND‟, delay time is 1 min, turn on AC when true.
Can check the UV Switch No. from IR Emitter, here 25℃ is UV Switch 3.
c) 1 minute after people left the room, turn off the lights and set temperature as 27℃:
Set IR Sensor - „No Movement‟, delay time is 1 min, turn off light(1-6) channel1 and AC go
to 27℃ when true.
Multi function Sensor–User Manual
14
Advertisement
Table of Contents
